What To Do With An Ugly Brick Fireplace – Learn how to panel a brick fireplace with wood to transform it from old-fashioned to timeless with stone, painted wood, and a rustic pine fireplace.
When we first moved into our 1980s colonial, I knew right away that I wanted to replace the brick fireplace in our family room. In this post, I’ll show you step by step how you can follow our process on how to resurface a brick fireplace to give it a clean and modern look! Here you can see more of our family room after adding the built-ins later.
What To Do With An Ugly Brick Fireplace
The easiest and cheapest way to cover a brick fireplace is to paint the brick. Make a big impact at a great price. Painting the brick surface was a temporary option I considered before finally covering it with wood and stone. If the project was outside of our time frame, I would go after it!
Our Diy Faux Brick Fireplace
Finally, we paneled our fireplace with wood and stone to add a backsplash for our later built-in bookshelves and TV.
After all, the main reason you should maintain your brick and wood fireplace is to save money. Brick is a solid base for anchoring wood and gives your brick facade a built-in look. By building on existing bricks, you can save both time and money.
We used to have an old brick stove and it certainly wasn’t terrible, especially when the walls were no longer yellow. However, our place was not what we thought. The scale was also small, with high cathedral ceilings.
Our two biggest challenges were smoke-stained bricks and traces of explosives. We also knew we wanted something different in the fireplace. As a result, we worked to create a stone and wood fireplace suitable for our renovation.
Got Ugly Brick? How To Paint Fireplace Mantel
We made a huge mess and removed only the best courses. We used a combination of a crowbar, a chisel, a hammer and a regular hammer. I like the demo!
We ran a tunnel through a large hole in the wall so they wouldn’t expose the ugly TV wires again. You can learn more about how to decorate a TV on your dresser here!
Mack made a box out of scrap plywood and attached it to the brick using construction adhesive. Now the furnace is red and ready for stoning!
Say goodbye to our old lawn tractor with Super White Quartzite and Jet Mist Granite countertops and accessories. I was ready to lay the floor, so it was amazing to have something tall! Actually, this is the Carrera and Soapstone knockoff that I really crave. However, we chose this hard and durable option because both stones are soft.
Diy Concrete Fireplace For Less Than $100!
Once the stones were in place, we used construction glue and masonry screws to attach the 2x6s to either side of the brick and the 2x4s to the top of the brick. This will act as a nail for the fixing boards.
Thanks to our stepped bricks and the resulting demonstration, we can spend money outside the void to use the lights. They add extra strength to the glue and nails we used to attach the original floorboards to the 2×6.
Since the top plate doesn’t have any details, we used gaps behind the tile to ensure the top plate lined up with the detail plates.
If you look closely at this photo, you can see that the top floor panel sticks out a bit more than the side panels.
An Update On Our Painted Stone Fireplace
But after adding the trim boxes, the top panel aligns with these new detail panels. We used very small pieces of pine to make the boxes with the trim details and attached them with wood glue and small finishing nails.
We then filled in the top area to create a flat base for the baskets. Putty and sand removed any cracks or gaps between the floor pieces so that we had a smooth base to attach the brackets to.
Then we glue the protrusions with wood glue and finishing nails. Although these particular consoles are no longer available, I found similar ones here.
We used our spray paint to give the fireplace a nice smooth look. I could never achieve the results we get with a brush! You can learn more about my spray painting technique here.
Over 30 Amazing Fireplace Makeover Ideas
You’ll notice that we’re very careful to hide everything – especially the TV – so there are no drips or splashes. We used Benjamin Moore Aura Paint + Primer in Simpli White Semi-gloss.
For the fireplace we used a solid piece of pine from a tree that my father cut down. Our family friend Bernie milled it, then we cut it to size using a table saw and compound saw, sanded and finished with Minwak Dark Walnut.
Mac attached the fireplace with two very long screws, but didn’t attach it permanently as it will have to come off when we get to phase 2 – the recess around it and the rear TV.
Since we first posted this, we’ve had a lot of questions about what we do to hide TV wires. Since it’s a two person job (and very painful) I couldn’t photograph the stairs. But here’s an explanation of what we do.
How To Paint A Brick Fireplace (the Right Way)
I mentioned earlier that we used the hole in the wall where we removed the rows of bricks. This exposed the studs which we could then drill with the hole saw. We also drilled a hole in the bottom of the wall near the fireplace near the outlet.
We threaded a light rope through the strings and pulled it out through the hole at the bottom of the wall. This will make it easier for a licensed electrician to pull the appropriate wires into the outlet and cable later. After that, we just plug the TV and the cable into the sockets.
And here are the results of how to cover a brick fireplace with wood. We are very pleased with the appearance of this old fireplace and look forward to the completion of the project and the recess in the future. This is a huge improvement by the way! I know it was quiet here last week, but I’m back today to share how I completely replaced my 1980s fireplace for about $100.
I’ve been blog crazy the past few days, but with good reason. I’m sorry, my one-year-old son recently kicked me. You see, she’s now an obsessive-compulsive provider (I actually can’t turn my back on the baby for a second) and I’m trying to adjust to this new, busy phase of my career from home. . Situation. If I want to achieve something, I think it will soon be time to go to the baby’s mom, like my three-year-old son does. Heck… I don’t even want to post pictures of my house project anymore because it always looks like a hurricane went through it (24/7 full floor dresser or kitchen cabinets). ain’t nobody got time for this
How To Whitewash A Stone Fireplace
My second reason is, to be completely honest, I’m a bit fed up with projects. As most of my readers have heard my bullshit, we recently completed an unexpected project that took us 4 months and $40,000 to complete. Needing a break from the real world, my husband and I went out of town for a few days to see a concert last week. Live music and a little break from our parenting roles is just what the doctor ordered.
With a bit of creative trepidation, I’m reviewing an old project that I haven’t had a chance to share with you.
The brick shade was too red and “eighties” for my taste. However, I didn’t want to completely cover the brick, so I decided to whitewash it with a combination of water and white latex paint. We also removed the copper curtain. I left it like that for about a year, but I wasn’t completely sold because I hated how the dated brick color looked with the bleached paint.
For your convenience, I have included affiliate links to the products used in this design. This means that if you click on one of the links and buy something, I get a small commission, but don’t worry… you won’t pay a penny more.
How To Paint A Brick Fireplace White
Desperate for warmth, I asked my husband to make a wooden fireplace frame out of plain wood, which cost about $30. It only took 2 hours to complete and had an amazing impact on the space. I was able to give the wood a reclaimed effect by first painting it with this wood stain. After applying the stain, I applied a diluted mixture of gray paint to the fireplace/beam, giving it a weathered effect.
What to do with red brick fireplace, ugly brick fireplace, what color to paint brick fireplace, what paint to use on brick fireplace, what to do with ugly brick fireplace, brick fireplace with wood mantel, ugly brick fireplace makeover, cover brick fireplace with drywall, what to do with brick fireplace, what sheen to paint brick fireplace, what to do with an old brick fireplace, how to build an outdoor brick fireplace
