How To Build A Billy Bookcase – How To Make An Internal Bookcase With Glass Front Oxburgh Doors With IKEA Billy For A Budget Hack.
Another IKEA Billy book for the books! After the third set of these bad boys we built in our home office remodel, Robert and I might be able to build a bookshelf in our bedroom this time.
How To Build A Billy Bookcase
But every time we do one of these hacks, it’s a different size or type of bookcase, and since there have been some random issues at IKEA lately, I thought I’d make a tutorial for it. A special thin version with a glass panel door so that the space can be adjusted.
Ikea Hack Faux Built In Bookcase Diy
Check out our DIY built-in entertainment center using high-quality wide-angle books. Or check out our DIY playroom made from bookcases with short and wide bookcases here.
They all work pretty much the same way, but we think we’ve mastered DIY built-in bookshelves with this technique.
If you’re looking for a less expensive way to create a high-end look in your home, need plenty of vertical storage without wasting space, or just want to try a beginner woodworking project, this is it!
(This is what we used, but you can modify many of the Billy bookcases and Oxburgh doors to fit your wall dimensions and needs.)
Diy Playroom Bookcase Built Ins
Note: Consider wall and ceiling measurements to accommodate the number of books and floor sizes you need. For reference, the ceiling is 8′ and our walls are 11.5′ wide.
To make the Billy bookcases match the back wall, remove the base plate. Use a utility knife to cut along the board’s fold lines. Then use a claw hammer and a small pry bar to pull the baseboard away from the wall.
Assemble all the Billy Bookcases, including the top extension. Leave the bookcases without the thin samuk attached to them because the back wall will be the back of the books when you build them.
Because the bookcases are designed for the back (but do not need to be folded to access the outlet), space is limited at the back.
Ultra Clever Ikea Billy Bookcase Hacks
To get the shape right, measure the bookcase and cut a 1×2 board. Attach the 1×2 to the bottom of the bookcase with finish nails.
Measure your wall and combine the bookcases and place them where you want them. Interbook edition.
Use your clamps to secure the sides of the two bookcases. Next, screw wood screws into both sides of the bookcase to secure it.
See the small space around the top and sides of the bookcases? We want to fill it so that the bookcases look like they are inside.
How I Created My Ikea Billy Bookcase Shelving Hack — Melanie Lissack Interiors
To make the bottom of the bookcase look like a fake built-in, attach the 1×4 boards to the front with finish nails.
Use a saw to cut the edges of the boards to match the shape of the board on the wall. It doesn’t have to be perfect because caulk can fix uneven cuts later. Repeat the process for the top of the Billy books, turning the ends of the 1×4 boards to form a crown.
Since the sides of the bookcase are not exactly the width of the floor, measure the space between the bookcase and the wall and cut a 1×10 board to fit the side using the circular saw and table saw.
Also, use the finish cutter to glue the 1×2 boards to the front of the bookcases to hide the cracks where the bookcases meet.
Diy Built In Bookshelves Using The Ikea Billy Bookcase Hack
Doesn’t he look fluffy and sturdy?! Well, then the cracks are filled with glue and the cracks are filled with Loctite foam.
Use Loctite foam to fill large gaps. We used it to fill the small gap between the bottom 1×4 and the bottom of the bookcase because it was too small for the fold. Once dry, cut the foam and sand it smooth.
Then use wood filler to cover any nail holes or cracks in the boards where they meet. Let dry.
We used our shop to remove the sand dust from the interior to get it ready for painting.
Ikea Billy Bookcase Hack
Paint all exposed surfaces with the satin paint you used to match the bookcases so that everything looks like one solid piece built into the bookshelves. The bookcases don’t need to be painted, just the boards.
We wanted to add glass/oxford panel doors to the front of some of the bookcases to provide hidden storage. IKEA’s Oxberg doors are designed to match bookcases, but with these built-ins, it’s tricky to hang them correctly.
The holes in the bookcases are no longer useful for hanging Oxburgh doors as intended in the design, new holes need to be made to take into account the depth of the boards 1×2 have been added to the front of the bookcases.
Use a square marker to mark the new holes on the front of the bookcases.
Easy Ikea Billy Bookcase Built In Hack — Abigail Amira Home
Put your mug in the bookcase. Use tape to mark where the holes will be so you know how far to dig new holes.
Hang the Oxburgh doors on the bookcases and check that all doors in the hall are correct. Then add a pull or a push.
Happy to fill those bookshelves! I like to rotate the extra books and arrange the books to match the decor. Play with heights and shapes until you like a decorative layout.
You can see the entire home office here with all the paint colors and decor/furniture we used!
Ikea Billy Bookshelf, Furniture & Home Living, Furniture, Shelves, Cabinets & Racks On Carousell
How to make a built in bookcase with oxford front doors for hidden storage using the cheap ikea billy bookcase for a high end look on a budget.
Have you made your own DIY bookshelf before? Or other great IKEA hacks? If you don’t, this is the proper warning you’ll get after completing your first mission. It’s like the ultimate training bike training course. Today we are talking about our IKEA Billy bookcase. How to turn IKEA bookcases into an interior wall!
After we moved into our home, we needed a wall for our farm. I contacted the cabinet shop that did our cabinets and it was out of stock. So I started looking into DIY options. I came across some IKEA hack walls installed and decided this might be the best solution.
We started with a 141″ wide wall and a 9″ ceiling. We removed the baseboards on this wall and saved them for later additions. My husband is an electrician, so this time he did the necessary wiring to be able to install the light after the installation was complete. If you are interested in wire lights, you should call an electrician.
Innovative Ikea Billy Bookcase Hack Ideas
We purchased and assembled the following IKEA Billy Bookcases: (4) Billy Bookcase 31.5″x79″x11″ (4) Billy Bookcase Height Extension 32″x14″x11″ (8) Oxberg Doors.
Find bookcases here. Click here for more information. Find the numbers here. Tall extensions add height to your bookcase. We have 9′ ceilings so we wanted a tall bookcase. This may or may not be for you!
Other things we used: 1×10 MDF trim for the top; 1×6 MDF trim for sides; 1 × 4 MDF trim for center of each floor; 2x4s and OSB crown molding for the top; 5 1/4″ crown molding; Benjamin Moore paints the product frame white for all trim; Plaster and nail polish. Everything is attached to the base of the column.
Tools used: Compound miter saw; table saw; drill; Nail gun and crimper. Everything is connected to the bottom of the column.
Office Makeover Reveal
We will make a shelf for the bookshelves to sit on to build the first shelf by taking the 6 inch base mold again and going back later.
Later, some wood was attached to the walls and ceiling. We used a screw that could hit the wood and rock anchors if we couldn’t. This is used to secure the finished trim after the wood has been cut.
Books are placed on top of the table. (You can see the wood mentioned in the previous step above.) We placed the bookshelves so that the pieces were balanced on each floor and wall.
The space between the wall and bookcases is greater than the space between each shelf (and will vary depending on the size of the wall) but the measurements between the left bookcase with wall and the right bookcase with wall. it’s the same. , and the distance between each plane.
Diy: Converting A Few Ikea Billys Into Something More Personal.
Later we added other cosmetic items
How to build ikea billy bookcase, similar to billy bookcase, how to build bookcase, how to build bookcase door, how to build a billy bookcase, how to build bookcase wall, how to build bookcase shelves, how to build simple bookcase, alternative to billy bookcase, how to build corner bookcase, how to build barrister bookcase, how to build a bookcase